ATG rear mirror FIX – adhesive set for attaching car interior mirror to the windshield – incl. activator in 3-part car repair kit – DIY Smart Repair

• Super-adhesive rearview mirror glue for permanent installation: In combination with the activator, the very strong special adhesive ensures the perfect connection between windshield and metal support plate in the car’s interior.
• Easy and uncomplicated to use: The liquid adhesive material included in the interior mirror adhesive set is easy to process, thereby not only upgrading your car, but also making it safe for traffic.
• The ATG bonding agent – brings together what belongs together: If your car’s rearview mirror has fallen down, you can reattach it to the vehicle’s windscreen with the DIY interior mirror adhesive set.
• Save time and money with the glass and metal adhesive: If the car mirror has lost its hold, you can patch it up yourself, expertly and in workshop-quality, using the rear mirror adhesive set and the Smart Repair method.
• Easy assembly for the highest security in road traffic, at any time of the year: In just a few steps, you can connect the mirror foot with the interior glass and even save on possible back payments for leasing vehicles.

SKU
ATG114
Manufacturer
ATG GmbH & Co. KG
Quantity
1 piece

9,95 € 4,95 (Grundpreis: 4,95 € / piece)

excl. 19 % VAT. excl. Shipping


Ready for shipping, delivery in 48h



Look, how easy it is!

ATG rear mirror FIX – the latest generation of glass and metal compounds by ATG

Has your car’s interior mirror fallen off? Not a problem for this super-adhesive mirror glue. Connect the metal mirror foot to your vehicle’s windscreen and save time and money. After a short drying period, you can once again drive safely down any street with everything perfectly in sight.

 

For permanent adhesion of car mirror and windscreen

✔ After just 30 minutes of exposure time, rear mirror and windscreen are once again firmly attached

Perfect fusion of glass and metal thanks to the special adhesive and activator

✔ Make your vehicle road safe and receive insurance cover with the rearview mirror adhesive set

 

The 3-part car repair set consists of:

·      1 x 0.6 ml activator

·      1 x 4 ml special adhesive

·      1 x detailed instruction manual

 

7 steps to success:

       1.   Remove the assembly support plate from the mirror mount. Note the side that will be pointing upwards.

2.   Afterwards, mark the position of the mirror mount outside from the windscreen.

3.   Completely remove any old adhesive.

4.   Open the cleaning and activator cloth.

5.   Clean the marked area with the cloth and let it dry for 20 seconds.

Do not touch the windscreen afterwards.

6.   Open the adhesive’s seal and cut off the top. Only use one drop for the carrier plate.

7.   Immediately attach the plate to the windscreen. Hold the part tightly for one minute.

You should wait for 30 minutes before mounting the mirror.

 

Note:

Carefully read the included instructions before use.

 

EN Warning:
Causes serious eye irritation. Causes skin irritation. May cause an allergic skin reaction. If medical advice is
needed, have product container or label at hand. Keep out of reach of children. Avoid breathing vapours
or spray. Wear protective gloves and eye-/face protection. IF ON SKIN: Wash with plenty of water/soap. Get
medical advice/attention if you feel unwell. Dispose of contents / containers in accordance with all local,
regional, national and international laws. Contains: 2-Hydroxypropyl methacrylate.
 
DE Warnung:
Verursacht schwere Augenreizungen. Verursacht Hautreizungen. Kann allergische
Hautreaktionen verursachen. Ist ärztlicher Rat erforderlich, Verpackung oder Kennzeichnungsetikett
bereithalten. Darf nicht in die Hände von Kindern gelangen. Einatmen von
Dampf oder Aerosol vermeiden. Schutzhandschuhe und Augen-/Gesichtsschutz tragen.
BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser/Seife waschen. Bei Unwohlsein ärztlichen
Rat einholen / ärztliche Hilfe hinzuziehen. Inhalt/Behälter in Übereinstimmung mit allen
lokalen, regionalen, nationalen und internationalen Gesetzen entsorgen. Enthält:
2-Hydroxypropylmethacrylat.

 

EN Application and storage:
Protect from sunshine. Protect from frost and heat. To avoid risks to man and environment, follow the
instructions. Keep out of the reach of children and animals. The product is not suitable for consumption. We
accept no liability for application errors.
 
DE Anwendung und Lagerung:
Vor Sonnenbestrahlung schützen. Vor Frost und Hitze schützen. Zur Vermeidung von Risiken für Mensch und
Umwelt die Gebrauchsanleitung einhalten. Für Kinder und Tiere unerreichbar aufbewahren. Das Produkt ist
nicht für den Verzehr geeignet. Für Anwendungsfehler übernehmen wir keine Gewähr.

– Es ist noch keine Bewertung für ATG rear mirror FIX – adhesive set for attaching car interior mirror to the windshield – incl. activator in 3-part car repair kit – DIY Smart Repair abgegeben worden. –
Rate this article
1
1
2
3
4
5
Name comment Security code Captchar Image
to top